Table of Contents
Advertisement
en Installation and connection
Set the maximum spin speed if you want to dry the
laundry in the tumble dryer afterwards.
¡ The drier the laundry, the shorter the programme
duration when drying which, in turn, reduces energy
consumption. A higher spin speed reduces the re-
sidual moisture in the laundry and increases the
volume of the spin noise.
Wash the laundry without prewash.
¡ Washing with prewash increases the programme
duration and increases energy and water consump-
tion.
The appliance has a continuous automatic load ad-
justment function.
¡ Depending on the type of fabric and load capacity,
the continuous automatic load adjustment function
optimally adjusts the water consumption and pro-
gramme duration.
4 Installation and connection
4.1 Unpacking the appliance
ATTENTION!
Objects remaining in the drum that are not designed
for operation with the appliance may cause material
damage and damage to the appliance.
Remove these objects, along with all supplied ac-
▶
cessories, from the drum before starting the appli-
ance.
Remove any packaging and protective covers com-
1.
pletely from the appliance.
→ "Disposing of packaging", Page 5
Check the appliance for visible damage.
2.
Open the door.
3.
Remove any accessories from the drum.
4.
Close the door.
5.
4.2 Contents of package
After unpacking all parts, check for any damage in
transit and completeness of the delivery.
ATTENTION!
If the appliance is operated with incomplete or defect-
ive accessories, the appliance may not be able to oper-
ate properly, or this may result in material damage or
damage to the appliance.
Do not operate the appliance with incomplete or de-
▶
fective accessories.
Replace the accessories in question before operat-
▶
ing the appliance.
→ "Accessories", Page 14
Note: The appliance has been tested at the factory to
check it is in working order. As a result, water stains
may remain in the appliance. These marks will disap-
pear after the first wash cycle.
The delivery consists of the following:
¡ Washing machine
¡ Accompanying documents
¡ Transit bolts
→ "Removing the transit bolts", Page 7
¡ Cover caps
6
The appliance comes with an AquaSensor.
¡ During the rinse cycle, the AquaSensor checks the
degree of turbidity of the rinsing water, and adjusts
the duration and number of rinse cycles accord-
ingly.
3.3 Energy saving mode
If you do not use the appliance for an extended period,
it automatically switches to energy-saving mode.
Energy-saving mode ends when you use the appliance
again.
If you do not continue operating the appliance, it
switches off.
Note: If Wi-Fi is activated, the appliance will not switch
itself off automatically.
¡ Water inlet hose
→ "Connecting the water inlet hose", Page 8
¡ Elbow for securing the water outlet hose
4.3 Requirements for the installation
location
WARNING ‒ Risk of electric shock!
The appliance contains live parts. Touching live parts is
dangerous.
Do not operate the appliance without a cover cap.
▶
WARNING ‒ Risk of injury!
When using the appliance on a base, the appliance
may tip over.
Always secure the feet of the appliance to a base
▶
using the manufacturer's fixing brackets
→ Page 14 before using the appliance for the first
time.
ATTENTION!
If residual water in the appliance freezes, this may
cause damage to the appliance.
Do not install or operate this appliance anywhere
▶
that is liable to experience frost or outdoors.
If the appliance is tilted at an angle greater than 40°,
residual water may leak out of the appliance and cause
material damage.
Tilt the appliance carefully.
▶
Transport the appliance in an upright position.
▶
Installation location
Base
Requirements
Secure the appliance with
fixing brackets
→ Page 14.
Advertisement
Table of Contents
