Table of Contents
Advertisement
Basic setting
Button signal
Drum cleaning reminder
17.2 Changing the basic settings
Set the programme selector to position 1.
1.
18 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
18.1 Cleaning the drum
CAUTION ‒ Risk of injury!
Permanently washing at low temperatures and a lack of
ventilation for the appliance may damage the drum and
cause injury.
Regularly run a programme for cleaning the drum or
▶
wash at temperatures of at least 60 °C.
Leave the appliance to dry after every operation with
▶
the door open, and leave the detergent drawer to
dry.
Run the
Drum Clean programme without laundry
▶
and with a cleaning agent for caring for the inside of
the appliance
→ "Accessories", Page 14 or with washing powder
that contains bleach.
18.2 Cleaning the drain pump
Clean the drain pump regularly, at least once a year, as
well as in the event of faults, e.g. blockages or rattling
noises.
Emptying the drain pump
Turn off the tap.
1.
Switch off the appliance.
2.
→ "Switching off the appliance", Page 15
Disconnect the appliance's mains plug from the
3.
power supply.
Programme position
3
4
Value
0 (off)
1 (quiet)
2 (medium)
3 (loud)
4 (very loud)
On
OFF
Press Spin Speed and, at the same time, turn the
2.
programme selector to position 2.
a The display shows the current value.
Set the programme selector to the required position.
3.
→ "Overview of basic settings", Page 18
To change the value, press - / +.
4.
To save the changes, switch off the appliance.
5.
Open and remove the maintenance flap.
4.
Slide a sufficiently large container under the open-
5.
ing.
Cleaning and servicing en
Description
The volume of the audible
signal emitted when the
buttons are pressed.
Activate or deactivate the
reminder to clean the drum.
19
Advertisement
Table of Contents
