Table of Contents
Advertisement
Note: To adjust the basic dosage for
steps with
i-DOS.
16 Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
Tips
¡ Please consult the documents supplied by
Home Connect.
¡ Please also follow the instructions in the Home Con-
nect app.
Notes
¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→ "Safety", Page 2
¡ Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
16.1 Setting up the Home Connect app
Install the Home Connect app on your mobile
1.
device.
1
Start the Home Connect app and set up access for
2.
Home Connect.
The Home Connect app guides you through the en-
tire login process.
16.2 Setting up Home Connect
Requirements
¡ The Home Connect app has been installed on your
mobile device.
¡ Wi-Fi has been activated on the router.
¡ The appliance is receiving signals from the WLAN
home network (Wi-Fi) at its installation location.
1
Apple App Store und the Apple App Store logo are trademarks of Apple Inc. Google Play and the Google Play logo are
trademarks of Google LLC.
, repeat the
1.
2.
16.3 Activating Wi-Fi on the appliance
Note: When Wi-Fi is activated, the energy consumption
increases in comparison to the values specified in the
consumption value table.
1.
2.
a The display shows Con.
3.
a Wi-Fi is activated.
Note: If Wi-Fi is activated, the appliance will not switch
itself off automatically.
16.4 Deactivating Wi-Fi on the appliance
1.
2.
a The display shows Con.
3.
a Wi-Fi is deactivated.
Note: The connection is automatically re-established
when the Wi-Fi is switched back on.
16.5 Resetting the appliance network
settings
1.
2.
a The display shows rES.
3.
a The display shows YES.
4.
a The network settings are reset.
a If End is shown on the display, the network settings
Use the Home Connect app to scan the QR code.
Follow the instructions in the Home Connect app.
Press and hold Remote Start
seconds.
Set the programme to position 4.
Press Start/Reload
shows On.
Press and hold Remote Start
three seconds.
Set the programme to position 4.
Press Start/Reload
shows OFF.
Press and hold Remote Start
3 seconds.
Set the programme to position 5.
Press Start/Reload
.
Press Start/Reload
.
are reset.
Home Connect en
for approx. 3
repeatedly until the display
for at least
repeatedly until the display
for at least
17
Advertisement
Table of Contents
