Control With The Camera's Menu Screen - Godox V860III-C User Manual

1. Press <MENU> Button until C.Fn menu is displayed. The "Ver x.x" in the top right
corner refers to the software version.
2. Select the custom function No.
Turn the Select Dial to select the Custom Function No.
•
3. Change the Setting.
Press Set Button and Setting No. Blinks.
•
Turn the Select Dial to set the desired number. Pressing Set Button will confirm
•
the settings.
After you set the Custom Function and press <MENU> button, the camera will be
•
ready to shoot.
4. In the C.Fn states, long press the "Clear" button for 2 seconds until "OK" is
displayed on the panel, which means the values in C.Fn can be reset.

Control with the Camera's Menu Screen

If the camera flash is attached to an EOS camera which has a speedlite control function,
the flash can be controlled using the camera's menu screen. For the menu operation
procedure, refer to your camera's instruction manual.
Setting Camera Flash Functions
•
The following function are settable according to different flash modes.
1. Flash mode
2. Shutter sync (1st/2nd curtain, high speed sync)
3. FEB
4. Flash exposure compensation
5. Flash firing
6. Clear camera flash's settings
Custom Function of Camera Flash
•
C.Fn-00, C.Fn.01, C.Fn-03, C.Fn-08, C.Fn-10, C.Fn-20, C.Fn-22
Clear All Flash Custom Function
Flash function settings screen
*Screens from the EOS-1D Mark III.
If flash exposure compensation has already been set with the camera flash, flash
•
exposure compensation cannot be set with the camera. To set it with the camera,
the camera flash's exposure compensation must be set to zero.
Flash C.Fn settings screen
32