The power turns off by itself.
After 90 seconds of idle operation, auto power off took effect if the flash is set as
Transmitter.
Press the shutter button halfway or press any flash button to wake up.
•
After 60 minutes (or 30 minutes) of idle operation, the flash unit will enter sleep mode if
it is set as Receiver.
Press any flash button to wake up.
•
Auto zoom does not work.
The camera flash is not attached securely to the camera.
Attach the camera flash's mounting foot the camera.
•
The flash exposure is underexposed or overexposed.
There was a highly reflective object (e.g. glass window) in the picture.
Use FE lock (FEL)
•
You used high-speed sync.
With high-speed sync, the effective flash range will be shorter. Make sure the
•
subject is within the effective flash range displayed.
You used Manual Flash Mode.
Set the flash mode to ETTL or modify the flash output.
•
Photos have dark corners or only parts of the target subject are
illuminated.
The local length of lens exceeds the flash coverage.
Check the flash coverage you set. This flash unit has the flash coverage between
•
20 and 200mm, which fits medium-format cameras.
Firmware Upgrade
The USB port is a Type-C USB socket. Type-C USB connection line is applicable.
•
As the firmware upgrade needs the support of Godox G3 software, please
•
download and install the "Godox G3 firmware upgrade software" before
upgrading. Then choose the related firmware file.
As the product needs to do firmware upgrade, please refer to instruction manual
•
of the newest electric version as final.
37