Press function button 3
<FEB icon>. The icon
<
> and the exposure
bracketing will be
highlighted on the LCD
panel.
FEB will be cancelled after three photos are taken.
•
For best result, set the camera drive mode to "single" and ensure the flash is
•
ready before shooting.
FEB can be used with FEC and FEL.
•
You can prevent the FEB from being cancelled automatically after three
photos are taken. (C.Fn-FEB ACL)
FEL: Flash Exposure Lock
FEL can lock the correct flash exposure setting for any part of the scene.
With <ETTL> displayed on the LCD panel, press the camera's <FEL> button. If the camera
does not have the <FEL> button, press <*> button.
1. Focus the subject
2. Press the <FEL> button.
Aim the subject at the center of the viewfinder and press <FEL> button.
•
The camera flash will fire a preflash and the required flash output for the subject
•
in retained in memory.
Each time the <FEL> button is pressed, a preflash will be fired and a new flash
•
exposure setting will be locked.
Set the flash exposure
compensation amount.
Turn the Select Dial
•
to set amount.
"0.3" means 1/3
•
step, "0.7" means
2/3 step.
15
Press Set Button again to
confirm the setting. Then
your FEC and FEB settings
are displayed on the LCD
panel.