Table of Contents
Advertisement
Available languages
Available languages
Number of flashes what will activate over-temperature protection in high-
speed sync triggering mode:
Power Output Level / Number of Flashes / Zoom (mm)
Other Protections
The system provides real-time protection to secure the device and your safety. The
following lists prompts for your reference:
Prompts on
LCD Panel
E1
E2
E3
E9
Meaning
A failure occurs on the recycling system so that the flash cannot fire.
Please restart the flash unit. If the problem still exists, please send
this product to a maintenance centre.
The system gets excessive heat. Please allow a rest time of 10
minutes.
The voltage on two outlets of the flash tube is too high. Please send
this product to a maintenance centre.
There are some errors occurred during the upgrading process.
Please using the correct firmware upgrade method.
34
Advertisement
Table of Contents
