Press the depth-of-field preview button on the camera to fire a modeling flash.
•
If the Receiver unit's auto power off function is workable, press the Transmitter
•
unit's test button to power it on. Please note that test firing is unavailable during
the camera's regular metering time.
The effective time of Receiver auto power off is changeable (C.Fn-RX STBY)
•
By making some settings, the auto AF-assist transmitter will not blink after the
•
Receiver unit's flash ready indicator is lightened. (C.Fn-AF)
Using Fully Automatic Wireless Flash
The FEC and other setting that set on the Transmitter unit will also be appeared on the
Receiver unit automatically. The Receiver unit does not need any operation. Use the
following settings to make wireless flashes according to the same methods with normal
flash shooting.
Flash Exposure Compensation
•
Flash Exposure Lock
•
Manual Flash
•
Stroboscopic Flash
•
About the Transmitter Unit
Use two or more Transmitter units. By preparing several cameras that with Transmitter
units flash attached, cameras can be changed in shooting while keeping the same
lighting source. (Receiver unit).
M: Wireless Flash Shooting with Manual Flash
This describes wireless (multiple shooting) using manual flash. You can shoot with a
different flash output setting for each Receiver unit (firing) group. Set all parameters on
the Transmitter unit.
Setting the flash mode to
<M>
Setting flash output.
1/2/3/4<A/B/C/D>
Press Function
•
Button 3 <
Turn the Select Dial
to set the flash
output of the
groups. Press Set
Button to confirm.
27
Taking the picture.
Each group fires at
•
the set flash ratio.
>