Replacing The Erm; Replacing The Ups Batteries - HPE G2 R5000 3U User Manual

Replacing the ERM

Procedure
1. Disconnect all ERM cabling.
2. Remove the screws securing the ERM to the rack.
3. Remove the ERM from the rack.
To replace the component, reverse the removal procedure.

Replacing the UPS batteries

CAUTION: Internal batteries are heavy. Use caution when handling heavy batteries.
Procedure
1. Remove the center cover of the front panel.
2. Remove the two screws from the front panel.
3. Press the bezel to the right, ad then open the left side of the front panel.
34
Maintenance