Installation
Precautions
Save these instructions. This document contains important safety instructions that must be followed during installation,
operation, and maintenance of the UPS and batteries.
WARNING: A risk of personal injury from electric shock and hazardous energy levels exists. The installation of options
and routine maintenance and service of this product must be performed by individuals who are knowledgeable about
the procedures, precautions, and hazards associated with AC power products.
48 106
68 150
WARNING: To reduce the risk of personal injury or damage to the equipment, observe local occupational health and
safety requirements and guidelines for manual material handling.
WARNING: To prevent personal injury from earth conductor leakage current:
•
Do not operate the UPS while disconnected from the utility power source.
•
Disconnect load devices before disconnecting the UPS from the utility power source.
Preparing to install the hardware
Before installing the hardware:
1. Be sure the necessary tools and materials are available.
2. Select an installation site.
3. Prepare the equipment for installation in the rack.
Tools and materials
The following tools are required for installation:
Phillips screwdriver
The following items are supplied with the UPS:
This symbol indicates that the UPS exceeds the recommended weight for one individual to handle
safely.
This symbol indicates that the ERM exceeds the recommended weight for one individual to handle
safely.
16
Installation