Maintenance; Replacing The Ups; Replacing The Erm; Updating The Ups Firmware - HPE G2 R5000 User Manual

Maintenance

Replacing the UPS

Procedure
1. Power down all attached load devices.
2. Power down the UPS.
3. Unplug the UPS power cord.
4. Disconnect all cabling.
5. Remove the screws securing the UPS to the rack.
6. Remove the UPS from the rack.
To replace the component, reverse the removal procedure.

Replacing the ERM

Procedure
1. Disconnect all ERM cabling.
2. Remove the screws securing the ERM to the rack.
3. Remove the ERM from the rack.
To replace the component, reverse the removal procedure.

Updating the UPS firmware

To update the UPS firmware, see the Hewlett Packard Enterprise website.
30 Maintenance