Basic Features Of Awin Gw100 Rev.2; Get Familiar With Awin Gw100 Rev.2; Figure 1: Awin Gw100 Rev.2 Gateway And Its Interfaces; Table 4: Leds Information - ABB GW100 User Manual

G ET FAMI LIAR WITH AWI N GW100 R EV.2
3

Basic Features of AWIN GW100 rev.2

The AWIN GW100 rev.2 is a WirelessHART gateway. It can connect with up to 25 WirelessHART
field devices and convert the HART data to Modbus TCP data for easy integration into almost
any ModbusTCP based host system. The connection can be established via the onboard
Ethernet ports. HART to Modbus TCP mapping is available in both automatic and manual
modes. In automatic mode, the gateway automatically assigns registers to available parame-
ters. Whereas, in case of manual mode the user must supply a custom Modbus list in the
form of an XML file.
3.1

Get Familiar with AWIN GW100 rev.2

The AWIN GW100 rev.2 is a DIN rail-mount wireless device with a protection rating of IP20
(see Figure
WirelessHART antenna connector allows remote mounting of the antenna. The gateway
comes with built-in LEDs, see description in
ST
MESH
LINK/ DATA
ERR
16
1). The gateway has RJ45 connectors for connection of Ethernet devices. The

Table 4: LEDs Information

Shows power and device status
Reports if WirelessHART devices connected
Shows LAN status per port (not marked)
Reports the device error
The term WirelessHART gateway as used in this product is inclusive of three func-
tions as defined by the HART specifications.
– Gateway (see section
– Access point (see section
– Network manager (see section

Figure 1: AWIN GW100 rev.2 gateway and its interfaces

BA SI C FEAT URES O F A WI N G W1 00 REV .2
Table 4.
LEDs Information
WirelessHART Gateway).
WirelessHART Gateway).
Network Manager).
3B NP 10299 2 B