Ip Configuration; Figure 18: Ip Configuration Screen - ABB GW100 User Manual

I P CO N FIG UR AT IO N
6.10

IP Configuration

Click Configuration > Network Interface > IP Configuration in the left navigation column to
show the Local Area Network (LAN) configuration parameters.
The buttons and fields in this window are:
– Link Speed and Duplex determines the speed of the communication channel. Leave the
setting at AUTO if not sure about the link speed. If manual option is selected, then the
connected device must be set to the same speed.
– Ethernet IP Configuration selects the method your network uses to obtain IP addresses.
If using static IP addresses, enter the IP address assigned to the gateway. Each device on
the network must have a different IP address.
If a DHCP server is on the network and will assign IP addresses to the AWIN GW100 rev.2, click
Use DHCP to get an IP address radio button.
Enter a "LAN Default Gateway," if desired.
42

Figure 18: IP Configuration screen

If the IP address is changed from the factory default, you will need to know this
to log back into the gateway for future configuration changes.
CO NF IG URATI ON
3B NP 10299 2 B