Channel Blacklist; View Devices; Figure 15: Device Information Screen; Table 11: Frequency Of Each Channel Of Network - ABB GW100 User Manual

CO NF IG UR AT IO N
6.6.2
Channel blacklisting is a way of limiting the number of channels used in a network. When
channels are blacklisted, they are not used in the network.
Although the network may operate on as few as five channels, it is recommended that the
network run on as many channels as possible for more overall available bandwidth. Note that
the number of usable channels must be an odd number.
To blacklist a channel, enter the frequency of the Channel Blacklist field. The channel must be
blacklisted in pairs.
Channel No.
1
2
3
4
5
6
7
8
6.7

View Devices

Click Configuration > WirelessHART > Devices in the left navigation column to view the num-
ber of devices in the WirelessHART network.
The device information page displays data about the devices in the WirelessHART network.
The Device ID is used for addressing the device via Modbus TCP. Devices connected to Wire-
lessHART adapters appear below the adapter and do not have a MAC address.
Network reliability is a measure of the percentage of packets received by the AWIN GW100
rev.2 divided by the total packets on the network.
The list of devices is color coded to indicate the status of each device.
3B NP 10299 2 B

Channel Blacklist

Table 11 lists the frequency of each channel.

Table 11: Frequency of each channel of Network

Frequencies
2405
2410
2415
2420
2425
2430
2435
2440

Figure 15: Device Information screen

Channel No.
9
10
11
12
13
14
15
VIE W DEV ICE S
Frequencies
2445
2450
2455
2460
2465
2470
2475
37