GE Amersham Imager 680 Operating Instructions Manual page 31

Character
MM
SSSSS
Example: A product with serial number YMM = 364 is manufactured in April 2013. For
information regarding shelf life please contact your local GE representative.
Symbols used on the labels
The following symbols can be found on the label on the instrument:
Label
Amersham Imager 680 Operating Instructions 29271308 AB
Meaning
The manufacturing month + 60
Serial production number
Meaning
Warning! Read the Operating Instruction before using the system.
Do not open any covers or replace parts unless specifically stated
in the Operating Instruction.
The instrument complies with the requirements for electromagnetic
compliance (EMC) in Australia and New Zealand
The instrument complies with applicable European directives
This symbol indicates that the waste of electrical and electronic
equipment must not be disposed as unsorted municipal waste and
must be collected separately. Please contact an authorized repre-
sentative of the manufacturer for information concerning the de-
commissioning of equipment.
This symbol indicates that the product contains hazardous materials
in excess of the limits established by the Chinese standard GB/T
26572 Requirements of concentration limits for certain hazardous
substances in electrical and electronic products.
Eurasian Conformity mark: the single conformity mark indicates
that the product is approved for circulation on the markets of the
member states of the Eurasian Customs Union.
This symbol indicates that the instrument has been certified by a
Nationally Recognized Testing Laboratory (NTRL). An NRTL is an
organization that the Occupational Safety and Health Administration
(OSHA) has recognized as meeting the legal requirements in USA
title 29 of the Code of Federal Regulations (29 CFR) Part 1910.7.
2 Safety instructions
2.2 Labels
31