GE Amersham Imager 680 Operating Instructions Manual page 233

After cleaning trays, inserts and/or diffuser boards, wash the accessory in water using
a soft sponge soaked in a cleaning agent.
After cleaning, rinse the accessory immediately in water, until no detergent remains,
and allow to air dry.
Cleaning gel sheets
After use, wash the gel sheet with mild detergent, rinse with water then dry well.
Note:
Amersham Imager 680 Operating Instructions 29271308 AB
NOTICE
Do not use abrasive cleaning materials, such as a scouring pad,
for cleaning. This may scratch the surface.
A gel sheet can be reused about 20 times.
7 Maintenance
7.2 Accessories
233