Lane Creation - GE Amersham Imager 680 Operating Instructions Manual

6 Analysis software
6.2 Software operation

6.2.1 Lane creation

6.2.1 Lane creation
Description
This is the first step of the analysis workflow. The selected image appears on screen with
a grid of automatically created lanes and the button Lanes marked in the workflow. The
options for lane creation are presented next to the image.
Use the Lane Creation options to the right to arrange the lane grid to correspond with
the lanes in the image.
Adjust the lane grid
Follow the instructions below to adjust the lane grid to match lanes in the image.
Step
1
2
214
Action
Select the minus and plus buttons adjacent to Number of lanes to increase
or decrease the number of grid lanes to correspond with the number of
lanes in the image.
Select a grid corner circle.
Result: The selected corner circle is highlighted.
Amersham Imager 680 Operating Instructions 29271308 AB