GE Amersham Imager 680 Operating Instructions Manual page 150

5 Operation
5.5 Capture an image
5.5.4 Fluorescence capture
Step
8
9
10
11
150
Action
Note:
The colorimetric marker is not displayed in the preview.
Choose one of the two options displayed to the right of the image to point
to the area of interest:
•
Choose , then point to one point of interest in the image.
Result: The selected point will be highlighted with an X.
•
Choose , and then point to two diagonal corners of an area of interest
in the image.
Result: The selected area will be highlighted with a square.
Use the right hand side arrow buttons to move the marked point or area.
Select Start exposure and wait for the exposure to finish.
When the exposure is finished the image view appears displaying the images.
Amersham Imager 680 creates a folder containing the created image files
which can be saved.
For details see File formats, on page 174.
Select the relevant tab of Sample and Marker for the image you wish
•
to display. A selected tab is highlighted with blue text and frame.
Select both tabs simultaneously to see a composite color image of the
•
Sample and Marker images.
Select the Save button to save the images.
For other options after capturing see Options after capturing, on page 135.
Amersham Imager 680 Operating Instructions 29271308 AB