GE Amersham Imager 680 Operating Instructions Manual page 128

5 Operation
5.5 Capture an image
5.5.2 Chemiluminescence capture
Step
11
12
Chemiluminescence with
advanced exposure
Follow the instructions below to perform chemiluminescence capture with Advanced
exposure mode.
Note:
Step Action
1 In the Capture tab, select Chemiluminescence.
Result: The options available for chemiluminescence capturing are displayed to the right on
the screen.
2 If your sample contains a colorimetric marker, then check the Colorimetric marker check
box.
128
Action
Use the Select button to select which image or images you wish to save.
Then select the Save button.
Note:
If you select more than one image, then the Library view will open after se-
lecting Save.
If Colorimetric marker was selected it is possible to check the check box
With marker to display the marker image.
This exposure mode is for greater control of image capture in case it is needed
for a particular application.
NOTICE
When using advanced exposure, images that are not selected will
be deleted at saving.
Amersham Imager 680 Operating Instructions 29271308 AB