Table of Contents
Advertisement
5 Operation
5.7 Save and manage image files
5.7.2 Save images
Step
4
5
6
File formats
The saved image files are stored in the formats described in the following table.
Note:
Imaging method
Chemiluminescence
174
Action
To add a comment, select the Comment: field. This opens a keypad view.
Type you comment and then select Done to return to the previous view.
Select Save to save the file(s). The saved files can be accessed via the Library
tab. See Section 3.5.2 Description of the Library tab, on page 56 for more
details.
If capturing is finished for the day, switch off the instrument by pressing the
On/Off button on the front panel. Wait until the instrument is shut down (LED
lights are turned off). Then press the Power switch on the right side of the
instrument to the O position.
Note:
To optimize the instrument's life time and to minimize unnecessary power
consumption, shut down the instrument when image captures and analyses
have been completed for the day. If the Amersham Imager 680 instrument is
used around the clock, make sure to restart the system at least once a day
to remove temporary files that may take up unnecessary memory space.
The jpg images are created from the equivalent tif image, to facilitate for pre-
sentation purposes.
File format of saved image
A folder containing the following files:
Sample: A
•
.tif
quantification of chemiluminescence data
A
image in gray scale, and with set
•
.jpg
contrast, for presentation purposes
Note:
The .jpg image is included in the folder but
it is not displayed on the screen.
Amersham Imager 680 Operating Instructions 29271308 AB
image in gray scale, for
Advertisement
Table of Contents
