Table of Contents
Advertisement
Auxiliary harness (H2)
LIGHT GREEN/BLACK
H2/1
This wire sends a negative pulse every time the remote start is activated, trunk
release is activated (programmable on/off) or when the doors are unlocked with
the remote. This can be used to pulse the disarm wire of the vehicle's factory anti-
theft device. Use a relay to send a (-) or (+) pulse to the disarm wire as shown
in the following diagrams.
Relay for Negative (-)
Disarm Wire
LIGHT GREEN/WHITE
H2/2
This wire sends a negative pulse every time the remote start shuts down or when
the doors are locked with the remote. This can be used to pulse the arm wire
of the vehicle's factory anti-theft device. Use a relay to send a (-) or (+) pulse to
the arm wire.
© 2008 Directed Electronics. All rights reserved.
(-) 200mA FACTORY ALARM DISARM OUTPUT
(-) 200mA FACTORY ALARM ARM OUTPUT
Relay for Positive (+)
Disarm Wire
21
Advertisement
Table of Contents
