Directed Electronics Viper 5501 Installation Manual page 43

Hide thumbs Also See for Viper 5501:

Table of Contents

Note:

Some features have more than two possible settings. Pressing

will toggle through the two-honk and higher settings.

Once a feature is programmed:

Other features can be programmed within the same menu

Another menu can be selected

The learn routine can be exited if programming is complete

Select a Feature. Press and release the Valet/

Program switch the number of times corresponding

to the feature you wish to change. For example, to

access the third feature, press and release 3 times.

Then press the button once more and HOLD it. The

horn honks the number of times equal to the feature

you have accessed. You can now release the

Valet/program switch.

Program the Feature. You can toggle the feature on

and off using the remote control. Press the button to

lock the system to select options in ascending order.

Press the button that unlocks the system, to select

options in descending order.

Press the Remote Start button to reset a feature to

the factory default.

After selecting the feature you want, release the Va-

let/program switch.

Table of Contents