Directed Electronics Viper 5501 Installation Manual page 17

Hide thumbs Also See for Viper 5501:

Table of Contents

BLACK

H1/5

We recommend that you do not use a factory ground. Ground all

your components to the same point in the vehicle, (preferably the

kick panel). Scrape away any paint and use a factory bolt or make

your own ground with a self-tapping screw and a star washer.

VIOLET

H1/6

This wire is used in vehicles that have a positive (+) switched dome light circuit.

Connect the violet wire to a wire that shows (+)12V when any door is opened,

and ground when the door is closed.

*Door trigger input is needed if one of the following are used: MTS, passive

arming, auto re-locking, door ajar error honk or Smart Key control.

(-) CHASSIS GROUND

(+) DOOR TRIGGER INPUT*

Table of Contents