D2D; The Control Center - Directed Electronics Viper 5501 Installation Manual

D2D

The system has the ability to interface with an XK module through the D2D port.
The advantage to using a D2D interface is that there is less wiring involved in
the installation. Check the XK module installation guide to determine which wires
are not needed, and which options are available.

The control center

The control center position should be discussed with the vehicle's owner prior to
installation. The LED and Valet switch is housed on the control center, so you will
want to make sure that the customer is satisfied with the location.
LED
Valet switch
8
© 2008 Directed Electronics. All rights reserved.