Replace/Install Cylinder - Assa Abloy Yale Real Living YRD210-ZW Installation And Programming Instructions

How to Replace or Install Cylinder
1. Remove cylinder:
A. Remove outside escutcheon from door.
B. Remove rubber gasket.
C. Remove two screws holding plastic guide
in place.
D. Remove plastic guide.
E. Remove screw with washer holding cylinder in
place (visible after plastic guide is removed).
F. Remove cylinder by pulling towards the
door side of escutcheon.
Before installing cylinder, please be sure you have
correct length tailpiece.
2. Install new cylinder:
A. Reverse previous steps for removing cylinder.
D
Cylinder tailpiece information:
Requires addition of Thin Door Kit.
*
An ASSA ABLOY Group brand
C
L
1-3/8"* to 2" thick doors, L = 3-1/2" (88.8mm)
2" to 2-1/4" thick doors, L = 3-3/4" (95.3mm)
A
Tailpiece
T = .098" (2.5mm)
W = .2" (5.2mm)
w
T
B
F
16
P/N AYRD210-INST-FUL Rev B