Usb - Lexmark CS927 User Manual

Understanding the printer menus
Menu item
Local Domains
HTTP Proxy IP Address
FTP Proxy IP Address
HTTP Default IP Port
HTTPS Device Certificate
FTP Default IP Port
Timeout for HTTP/FTP
Requests
1–299 (30*)
Retries for HTTP/FTP Requests
1–299 (3*)
Note: An asterisk (*) next to a value indicates the factory default setting.

USB

Menu item Description
PCL SmartSwitch Set the printer to switch to PCL emulation when a print job received through a USB port requires
it, regardless of the default printer language.
Off
On* Note: When this setting is disabled, the printer does not examine incoming data and uses the
default printer language specified in the Setup menu.
PS SmartSwitch Set the printer to switch to PostScript emulation when a print job received through a USB port
requires it, regardless of the default printer language.
Off
On* Note: When this setting is disabled, the printer does not examine incoming data and uses the
default printer language specified in the Setup menu.
Job Buffering Temporarily store jobs on the hard disk before printing.
Off*
Note: This menu item appears only when a hard disk is installed.
On
Mac Binary PS Set the printer to process Macintosh binary PostScript print jobs.
Auto*
Notes:
On
•
Off
•
Enable USB Port Enable the front USB drive port.
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify domain names for HTTP and FTP servers.
Configure the HTTP and FTP server settings.
Specify the amount of time before the server connection stops.
Set the number of retries to connect to the HTTP/FTP server.
Auto processes print jobs from computers using either Windows or Macintosh operating
systems.
Off filters PostScript print jobs using the standard protocol.
81