Lexmark CS927 User Manual page 188

Upgrading and migrating
7
Unpack the memory card.
Warning—Potential Damage: Avoid touching the connection points along the edge of the card.
8
Insert the memory card until it clicks into place.
9
Attach the shield, and then attach the access cover.
10
Attach the connector cover.
11
If you removed a filter cover, then attach the cover.
12
Connect the power cord to the electrical outlet, and then turn on the printer.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
Installing a printer hard disk
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller
board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them off as well, and unplug any cables going into the
printer.
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
188