Installing The Optional Rspi Card - Dell HHB Owner's Manual

Figure 27. Removing the optional rSPI card
1. screw (2)
3. standoff (2)
Next steps
1. Install the rSPI card.
2. Follow the procedure listed in the After working inside your system section.
Related tasks
Before working inside your system

Installing the optional rSPI card

After working inside your system
Related reference
Safety instructions
Installing the optional rSPI card
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that came with the product.
NOTE: You must remove the rSPI card to replace a faulty rSPI card or service other components inside the system.
CAUTION: To prevent damage to the rSPI card, you must hold the card only by its edges.
1. Follow the safety guidelines listed in safety instructions section.
2. Keep the Phillips #2 screwdriver ready.
3. Remove the rSPI card.
Steps
1. Align the two screw holes on the rSPI card with the standoffs on the system board.
2. Install the two screws to secure the rSPI card to the system board.
2. rSPI card
4. connector
Installing and removing blade components 77