Dell HHB Owner's Manual page 66

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
CAUTION: To ensure proper system cooling, memory module blanks must be installed in any memory socket that is not
occupied. Remove memory module blanks only if you intend to install memory modules in those sockets.
1. Follow the safety guidelines listed in safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Remove the cooling shroud.
Steps
1. Locate the appropriate memory module socket(s).
2. To release the memory module from the socket, simultaneously press the ejectors on both ends of the memory module socket.
CAUTION: Handle each memory module only by the card edges, ensuring not to touch the middle of the memory
module or metallic contacts.
3. Remove the memory module from the socket.
Figure 17. Removing the memory module
a. memory module
b. memory module socket
c. memory module ejector (2)
Next steps
1. If you are removing the memory module permanently, install a memory module blank. If you are installing a new memory module, see
the Installing the Memory Module section.
2. Follow the procedure listed in the After working inside your system section.
Related tasks
Installing memory modules
Before working inside your system
After working inside your system
Related reference
Safety instructions
66 Installing and removing blade components