Expanded operating temperature restrictions
•
Do not perform a cold startup below 5°C.
•
135 W (4 core, 6 core, or 8 core) and 145 W processors are not supported.
•
Non-Dell qualified peripheral cards and/or peripheral cards greater than 25 W are not supported.
•
PCIeSSD is not supported.
•
When populating the blade slots in the M1000e enclosure with only PowerEdge M630 blades:
•
Install 86 mm width heat sink for processors of 120 W or more
•
Install 68 mm width heat sink for processors of less than 120 W.
•
If you install a blade with two processors in the M1000e enclosure, all blade slots in the enclosure must have PowerEdge M630
blades with the same configuration (PowerEdge M630 blades with two processors). However, vacant blade slots in the enclosure
can be installed with blade blanks.
Technical specifications
21