Dell HHB Owner's Manual page 86

Figure 35. Installing and removing a processor
1. socket-release lever 1
3. processor
5. processor shield
7. processor socket
Example
Enter an example that illustrates the current task (optional).
Next steps
1. Replace the processor(s).
2. Install the heat sink.
3. Reinstall the cooling shroud.
4. Follow the procedure listed in the After working inside your system section.
Related tasks
Before working inside your system
Installing the cooling shroud
Removing a heat sink
Installing a processor
Installing a heat sink
Removing the cooling shroud
After working inside your system
Related reference
Safety instructions
86 Installing and removing blade components
2. pin–1 corner of the processor
4. slot (4)
6. socket-release lever 2
8. tab (4)