Dell HHB Owner's Manual page 42

Option Description
Option
Drive Type
Capacity
Related tasks
Viewing SATA Settings
Related reference
SATA Settings
Integrated Devices
You can use the Integrated Devices screen to view and configure the settings of all integrated devices including the video controller,
integrated RAID controller, and the USB ports.
Related tasks
Integrated Devices details
Viewing Integrated Devices
Related reference
System BIOS
Viewing Integrated Devices
To view the Integrated Devices screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Integrated Devices.
Related tasks
Integrated Devices details
Related reference
Integrated Devices
Integrated Devices details
About this task
The Integrated Devices screen details are explained as follows:
42 Pre-operating system management applications
Description
Specifies the type of drive attached to the SATA port.
Specifies the total capacity of the hard drive. This field is undefined for removable media
devices such as optical drives.