U-Line CDE224C Quick Start Manual page 15

QUICK START GUIDE
USER GUIDE
Connections
When complete, the connections should look like this:
Keg
LEVELING INFORMATION
1. Use a level to confirm the
unit is level. Level should
be placed along top edge
and side edge as shown.
2. If the unit is not level,
shim as needed.
3. Confirm the unit is level
after each adjustment
and repeat the previous
steps until the unit is
level.
General Installation
Infuser
Regulators
Filter
Assembly
Keg
15
CAUTION
!
To comply with applicable federal, state,
and local codes, it may be necessary to
caulk the refrigerator to the floor.
CASTERS (optional)
1. Remove grille and back panel to access nuts.
2. Remove each nut and unscrew each leg.
3. Install each caster and secure with nut.
Tighten with included wrench.
4. Replace grille and back panel.
When ready to use, see FIRST USE section in
this manual.
u-line.com
u-line.com
Filter
Assembly