U-Line CDE224C Quick Start Manual page 13

QUICK START GUIDE USER GUIDE
Connect nitrogen to keg
1. Attach gas hoses to elbow connectors on infuser
regulators - line up and press in firmly.
2. Attach gray coupler of the gas jumper hoses to kegs.
With your thumb press down on the top of the coupler
while pulling up on collar. Press coupler down firmly
onto "in" valve. Release collar - listen for a click. Pull
up on the coupler to ensure it is locked down.
In Valve
Other ends are connected
to Infuser Regulators
3. Attach infuser hoses to T-connectors on infuser
regulators.
General Installation
Connect keg to tower
1. Attach black couplers of the liquid jumper hoses to
keg. With your thumb press down on the top of the
coupler while pulling up on collar. Press coupler down
firmly onto "out" valve. Release collar - listen for a
click. Pull up on the coupler to ensure it is locked
down.
Out Valve
13
u-line.com
u-line.com