Configuring A Sprecode Key Using The Mitel Web Ui; Park/Pickup Keys - Mitel 6873i User Manual

CONFIGURING SOFTKEYS

CONFIGURING A SPRECODE KEY USING THE MITEL WEB UI

Click on Operation > Softkeys and XML.
1.
or
Click on Operation > Expansion Module <N>.
Softkeys
Select from Key 1 through Key 48 on the Top keys.
2.
or
Select from Key 1 through Key 30 on the Bottom keys.
In the Type field, select Sprecode.
3.
In the Label field, enter a label to display on the IP phone for this key.
4.
In the Value field, enter the appropriate value for accessing specific services from the server.
5.
: For values to enter in this field, contact your System Administrator.
NOTE
In the state fields, check (enable) or uncheck (disable) the Connected state for this softkey.
6.
Expansion Module Keys
Select from Key 1 through Key 16 (M680i) or Key 84 (M685i).
7.
In the Type field, select Sprecode.
8.
In the Value field, enter the appropriate value for accessing specific services from the server.
9.
: For values to enter in this field, contact your System Administrator.
NOTE
Click Save Settings.
10.

Park/Pickup Keys

The 6873i phone has a park and pickup call feature that allows you to park a call and pickup a call when
required. The IP phones support the Park/Pickup feature on the Asterisk, BroadWorks, Sylantro, and ININ
call managers.
The park/pickup feature performs as follows:
When a call comes in and you pickup the handset, you can press the applicable Park key to park the
•
call
After the call is parked, you can press the Pickup key, followed by the applicable value to pickup the
•
call
P /P K
ARK ICKUP EYS
99