Table of Contents
Advertisement
5. Communication with PC
The oscilloscope supports communications with a PC through USB. You can use the
Oscilloscope communication software to store, analyze, display the data and remote
control.
To learn about how to operate the software, you can push F1 in the software to open the
help document.
Here is how to connect with PC via USB port.
(1) Install the software: Install the Oscilloscope communication software on the
supplied CD.
(2) Connection: Use a USB data cable to connect the USB Device port in the right panel
of the Oscilloscope to the USB port of a PC.
(3) Install the driver: Run the Oscilloscope communication software on PC, push F1 to
open the help document. Follow the steps of title "I. Device connection" in the
document to install the driver.
(4) Port
setting
"Communications" in the menu bar, choose "Ports-Settings", in the setting dialog,
choose "Connect using" as "USB". After connect successfully, the connection
information in the bottom right corner of the software will turn green.
Figure 5-1 Connect with PC through USB port
5.Communication with PC
of
the
software:
Run
the
Oscilloscope
47
software;
click
Hide quick links:
Advertisement
Table of Contents
