Vehicle Status Request; Status Request When The Engine Is Not Running - Directed AstroStart RS-625 User Manual

Vehicle Status Request

The status request feature allows the user to see the status of the vehicle
locked or unlocked or if the vehicle is in cold weather mode, home valet mode, in valet mode or
how much time is left in the run time cycle. The following charts (Tables 1, 2 and 3) indicate the
confirmation sequences.
To retrieve the vehicle status:
Press and release the AUX button then press and release the
The transmitter will then flash the corresponding sequence of LED's depending on the vehicle's
status.
If the engine is NOT running
If the vehicle is in or out of ready mode
If the engine IS running under a remote start (if the doors are locked)
or (if the doors are unlocked).
The status request feature is a two-step procedure:
The first sequence of flashes denotes if the vehicle's doors are locked or unlocked.
The second sequence of flashes (if applicable) denotes if the vehicle is Cold Weather mode,
Home valet mode, or, Valet mode.
If there is no second sequence transmission, then the vehicle is none of the 3 mentioned
features (Cold weather mode, Home valet mode or Valet mode).

Status Request When the Engine IS NOT Running

STATUS SEQUENCE LOCK
Lock 3 flashes
Unlock
1 sequence
st
3 flashes
if locked
Cold
1 sequence
st
Weather
if unlocked
2 sequence
nd
1 sequence
st
3 flashes
if locked
Home
1 sequence
st
Valet
if unlocked
2 sequence 1 second
nd
1 sequence
st
3 flashes
if locked
Valet
1 sequence
st
Mode
if unlocked
2 sequence 1 second
nd
P.16
i.e.: if the doors are
button (there will be a beep).
UNLOCK TRUNK START/STOP
3 flashes
3 flashes
1 second
3 flashes
1 second
3 flashes
1 second
User Guide
Beep(s)
1
2
2
2
2
2
1
1