How to use this device
70/92
12.16.10
Cleaning or replacing the interior lights
–
Remove the canopy panel: see page 61.
–
Remove the lamp cover at the foot end.
–
Remove the cap for the interior lighting: Remove 1 screw.
Replace the lamps: see page 64.
Replace the starter: see page 66.
The assembly is the same process in reverse order.
When assembling the device please note:
–
When replacing the lamp covers ensure that the clips are in contact with
the magnets.
–
Use scratch protection.
–
Carefully lay the canopy panel in the guide.