Quality Inspection And Acceptance Form; Limited Lifetime Warranty - ergoline JK 103/40-3 AC Operating Instructions Manual

10/2020 1006352-04E
17.2.3

Quality inspection and acceptance form

The form can be found in the separate document 'Quality inspection and
acceptance form' (#1014113-..) which is provided in the Technical Documen-
tation folder.
17.3

Limited Lifetime Warranty

Global Service USA warrants specific individual components of the tanning
system against defects in materials and workmanship for the life of the prod-
uct. Coverage is limited to units purchased after November 1, 1994.
This warranty is restricted to the following components only:
Steel Back Panels

Structural Steel Frame Components

Exterior Steel Body.

NOTE:
Components are warranted on an individual basis and not as
they may effect the complete product.
Warranty coverage does not include cosmetic abnormalities such as scratch-
es, nicks, dents, rust, oxidation of paint or other cosmetic changes that do not
interfere with the designed function of the unit.
This warranty does not include failure of the product due to alteration, modifi-
cations, misuse, abuse, improper maintenance, improper installation or repair.
This warranty is not transferable and is only applicable to the original pur-
chaser named on a completed and registered warranty record at JK-Products,
Inc. headquarters.
JK Products, Inc. obligations do not include transportation charged on the
shipping of new components to the customer or on the return of defective
JK-Products, Inc. – Limited Warranty
Operating instructions – 87/92