Installing A Legacy Diskette Drive - HP ProLiant ML310 Generation 3 User Manual

When using operating systems that support USB, the server supports USB
devices, including, but not limited to:
•
CD-ROM drives
•
Diskette drives
•
Keyboard
•
Mouse
For other operating systems, the ROM provides USB support for a keyboard,
mouse, and diskette drives, which do not support USB, but not for CD-ROM
drives.
ROM legacy USB support is available during POST and while the operating
system is running. The maximum device support is two USB keyboards, two
USB mouse devices, and one layer of hubs.

Installing a legacy diskette drive

1. Power down the server ("Powering down the server" on page 21).
2. Remove the bezel ("Unlocking the bezel" on page 22).
3. Remove the access panel ("Removing the access panel" on page 22).
4. Slide the diskette drive into the media drive bay.
Hardware options installation 51