Power-On Problems Flowchart - HP ProLiant ML310 Generation 3 User Manual

88 HP ProLiant ML310 Generation 3 Server User Guide

Power-On Problems Flowchart

Symptoms:
•
The server does not power on.
•
The system power LED is off or amber.
•
The internal health LED is red or amber.
Possible causes:
•
Improperly seated or faulty power supply
•
Loose or faulty power cord
•
Power supply cord improperly seated to system board
•
Power source problem
•
Power on circuit problem
•
Improperly seated component or interlock problem
•
Faulty internal component
Item
1
2
3
4
5
6
Refer to
Server user guide or setup and installation guide, located on the
Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms).
"HP Insight Diagnostics (on page 72)"
"Loose Connections (on page 83)"
Server maintenance and service guide, located on the Documentation
CD or the HP website (http://www.hp.com/products/servers/platforms)
"Integrated Management Log (on page 72)" or in the HP ProLiant
Servers Troubleshooting Guide located on the Documentation CD or
on the HP website (http://www.hp.com/support).
"Power Source Problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
(http://www.hp.com/support).