Server Fault Indications Flowchart - HP ProLiant ML310 Generation 3 User Manual

96 HP ProLiant ML310 Generation 3 Server User Guide

Server fault indications flowchart

Symptoms:
•
Server boots, but a fault event is reported by Insight Management Agents (on
page 70)
•
Server boots, but the internal health LED is red or amber
Possible causes:
•
Improperly seated or faulty internal or external component
•
Unsupported component installed
•
Redundancy failure
•
System overtemperature condition
Item
1
2
3
4
5
Refer to
"Management Agents (on page 70)"
• "Integrated Management Log (on page 72)"
• "Event List Error Messages" in the HP ProLiant
Servers Troubleshooting Guide located on the
Documentation CD or on the HP website
(http://www.hp.com/support).
Server user guide or setup and installation guide,
located on the Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms)
System Management Homepage
(http://h18013.www1.hp.com/products/servers/managem
ent/agents/index.html)
"Power-On Problems ("Power-On Problems Flowchart"
on page 88)"