Primary Front Bezel - HP ProLiant BL45p Maintenance And Service Manual

Remove the secondary chassis.
13.
Remove the primary access panel
14.
Remove the power button/LED board cable
15.
Remove the two T-5 screws and the power button/LED board.
16.
To replace the component, reverse the removal procedure.

Primary front bezel

Power down the server blade (on page 28).
1.
Remove the server blade (on page 28).
2.
Remove the access panel
3.
Remove the processor air baffle
4.
Remove the fan assembly
5.
All manuals and user guides at all-guides.com
("Primary access
("Access panel" on page 29).
("Processor air
("Fan assembly" on page 33).
panel" on page 29).
("Power button/LED board" on page 62).
baffle" on page 32).
Removal and replacement procedures 63