Weight Rod Assembly; Sr. Pan Tilt Head Setup - PROAIM CINEMA P-W5P-BRZ Assembly Manual

•
Attach the LCD (Not Included)
mounting arm insert the screws by aligning
the holes with each other then tighten with
the help of Screw Driver.
•
LCD is properly assembled with mounting
arm as shown in the image.

Weight Rod Assembly

•
Loosen the knob of the jib section and insert
the weight rod into it.
•
After inserting the weight rod, retighten the
knob to ensure slip free connection. Then
put weight (Not Included)
weight bar rod.
•
After adding weight, insert weight closure to
secure the weight properly.
Sr. Pan Tilts Head Setup
•
Loosen the wing and remove it from the
wing nut.
•
Attach Sr. Pan Tilt Head with jib Mounting
Plate. Align screw holes and tighten
precisely to secure the head.
to the LCD
to both ends of
15