•
Attach the LCD
(Not Included)
mounting arm insert the screws by aligning
the holes with each other then tighten with
the help of Screw Driver.
•
LCD is properly assembled with mounting
arm as shown in the image.
Weight Rod Assembly
•
Loosen the knob of the jib section and insert
the weight rod into it.
•
After inserting the weight rod, retighten the
knob to ensure slip free connection. Then
put weight
(Not Included)
weight bar rod.
•
After adding weight, insert weight closure to
secure the weight properly.
Spin-3 Pan Tilts Head Setup
•
Attach the Spin-3 (3-Axis) Pan Tilt Head into
the head platform mounted on the end of
the jib.
•
Then secure the pan-tilt head using the
provided knob, as shown in the image.
to the LCD
to both ends of
15