Weight Rod Assembly; Weight Mounting; Rear Frame Mounting Rod - PROAIM Kite-22 Assembly Manual

Weight Rod Assembly

•
Insert the Weight rod into Joystick Controller
Bracket.
•
Now, insert the black tube to the center.
•
Using the same step insert the black tubes to
the weight rod on both sides, as shown in the
image.

Weight Mounting

•
Put weights on the weight rods as per your
requirement.
•
Now, put stoppers to secure the weights.

Rear Frame Mounting Rod

•
Insert Rear Frame Mounting Rod into the
Joystick Controller Bracket and tighten them
securely.
18