Weight Rod And Weight Mounting - PROAIM Powermatic Scissor Pro JB-SCSR-02 Assembly Manual

FEATURE: Pan Lock enables locking the jib's pan
movement for achieving high/low angle shots.
And, Tilt Lock allows you to fix the jib's tilt angle
to get linear tracking shots.
NOTE: While using the jib at an extremely
high angle, the rear part of Gimbal will touch
Gimbal Bracket. Therefore, adjust the angle of
Gimbal Bracket by loosening the bolt of Guide
Rod Mount.

Weight Rod and Weight Mounting


Insert the Weight rod into the weight holder
of the controller box and tighten the knob.

Insert weights into the weight rod.
NOTE: Weight will be added according to the
setup requirement to balance the camera
securely.

Insert the weight closer and press its lever to
secure it.
6
Guide
Rod
High speed special bearing