PROAIM CINEMA P-W5P-BRZ Assembly Manual page 24

DETAILS OF ZOOM CONTROL
ATTACH TO THE PAN HANDLE
1. Loosen the clamp knob till enough space is
available.
2. Attach to the pan handle.
•
Centre of pipe should fit in the clamp
"V" shape.
•
Firmly tighten the clamp by using hands.
CAUTION: Do not use excessive force.
FIX THE CABLE TO ZOOM UNIT
•
Front and back side has Cable socket.
•
Insert the cable per your requirement. It
works same from both front and side
position.
ATTACH THE CABLE TO CAMERA
Make sure that switch is changed to corresponding mode.
1. Make sure that position is available on
camera.
2. Make sure that camera is switched off.
3. Insert the cable at designated position.
CAUTION: Do not insert at wrong position which will cause unexpected damage.
24