PROAIM CINEMA P-W5P-BRZ Assembly Manual page 17

•
(4 pin XLR) and controller cables are both
installed in the sockets of the joystick box.
•
Loosen the knob & Insert the joystick box
into the weight rod and tighten the knob
back to secure the joystick box.
CAUTION: The power specification we have
provided is as per 12volt. For this, we provide
a 12volt/3ampere regulated power adapter.
In case you use a voltage higher than 12V, it
will affect the performance and life of the
motor, and there is a high risk of the motor
getting damaged.
1. The Speed Controller adjusts the speed of pan & tilt based on the requirement of the shot.
2. Damping control prevents the Head from stopping with a jerk enabling you to achieve smooth endings.
3. You can reverse the panning & tilting direction as & when required
17