Advertisement
1
HD 150mm Bowl Baby Camera Tripod Stand w
Lever-Friction and Aluminum Spreader (P-LLBT-150)
A s s e m b l y M a n u a l
What's In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Spanner Size: 13mm
Aluminium
Spreader
HD 150mm Bowl Baby Camera Tripod Stand
with Lever Friction
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.
Advertisement
Table of Contents
Related Manuals for PROAIM P-LLBT-150
Summary of Contents for PROAIM P-LLBT-150
- Page 1 HD 150mm Bowl Baby Camera Tripod Stand w Lever-Friction and Aluminum Spreader (P-LLBT-150) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
- Page 2 Aluminum Spreader Setup • Extend the Spreader on the floor and loosen all three knobs. NOTE: The Spreader attaches to the spiked legs of the spreader to provide precise customization of the tripod's length and stability. • After loosening the knobs, extend the Spreader per your requirement.
- Page 3 150mm Bowl Baby Camera Tripod Stand Setup • Loosen all three adjustment knobs to set the desired height of the Stand. NOTE: One-stage telescopic design with friction knob extends up to 6 inches to capture low-angle shots, and conversely, it can be easily extended up to 34 inches for greater elevation.
- Page 4 Telescopic design provided with one-stage height adjustment...
- Page 5 • Loosen the locking knob of the bowl fluid head (Not Included) and remove it. • Now, mount the fluid head on the Tripod Stand. • Tighten the locking knob to secure the fluid head. • Press the yellow locking lever of the fluid head to unlock it.
- Page 6 YOUR PROAIM HD 150MM BOWL BABY CAMERA TRIPOD STAND W LEVER- FRICTION AND ALUMINUM SPREADER ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.
Need help?
Do you have a question about the P-LLBT-150 and is the answer not in the manual?
Questions and answers